You are here:

Others

HF-GENERATOR FOR BONDING OF ACETATE COMPONENTS

Heater with high-frequency generator series LFA/I45 is a machine,

specially developed for bonding of plastic and acetate material by

using special glue (no aceton).

 

Technical Data:

Power supply:400 V 50/60 cycles
Power consumption:4,5 KvA
Machine width:500 mm
Machine height:410 mm
Machine depth:1160 mm
Weight:85 kg

"CE"-regulations are met
All data subject to change!

Download Info-PDF Contact

DOSING UNIT (GLUE) FOR HF-BONDING GENERATOR

Pneumatic dispenser for glue complete with micrometric adjustable support and pedal foot switch.

Suitable for all types of fluids

Vacuum suck-back will effectively control glue dripping or stringing.

 

Technical Data:

Dispense time:0,1-20,00 seconds
Voltage: 230V 50/60 Hz
Internal Voltage:24VDC
Air input:3 - 7 Bar
Air output:0,1 - 7 Bar
Weight:2,2 kg

"CE"-regulations are met
All data subject to change!

Download Info-PDF Contact

Schüssler S-562 Programming station

Programming station with lens former tracing device and industrial type PC.


The following software packages are available:

  • Software MAKE DXF - S-562
  • Software S-50x - S-562 for S-500, S-501, S-503
  • Software S-6x0 S-50x - S-562 for S-502, S-504, S-610, S-620
  • Software S-63x - S-562 for S-633 and S-634

 

Technical Data:

Power supply:230 V singlephase 50/60 cycles
Power consumption:0.2 kW - 4 A
Machine width:520 mm
Machine height:410 mm
Machine depth:440 mm
Weight:22 kg

"CE"-regulations are met
All data subject to change!

Download Info-PDF Contact More

Schüssler S-650 cutter adjusting device

Cutter adjusting device for spindle type 5043 / 5046
This device must be connected to a PC via USB

Technical Data:

Power supply:230 V singlephase 50/60 cycles
Electric specifications:5 VDC - 200 mW
Machine width:520 mm
Machine height:380 mm
Machine depth:320 mm
Weight:16,5 kg

"CE"-regulations are met
All data subject to change!

Contact

Schüssler S-70 - Manual thread cutter

Thread-cutting, primary and secondary Simple, space saving design, vertical or horizontal installation possible Simplicity operation, both hands free.

Technical data:

Power supply:220 V single phase
50 Hz
50 Watt
Chuck:0 - 3 mm
Net weight:3,5 kg
Machine width:180 mm
Machine height:90 mm
Machine depth:130 mm

No maintenance

"CE"-regulations are met
All data subject to change!

Download Info-PDF Contact More

Schüssler S-875 - Electronic screwdriver with torque

Since a couple of years we are carrying in our sales program the Electronic Screwdriver S-875 with interchangeable heads S-880, S-881 and S-882. This reliable and handy little machine is nowadays frequently used in the assembly of fashionable masks and sports glasses.

Download Info-PDF More

Electroplating installations

for

  • Ultrasonic Cleaning
  • Electrolytic Degreasing
  • Copper plating
  • Nickel plating
  • Gold plating (micron)
  • Colour Gilding
  • Rhodium plating
  • Drying

The installations are built in a modular design. Thanks to a clear technical configuration and easy access for maintenance, this system guarantees trouble-free and economic electroplating.
We shall be glad to assist you in selecting the most suitable bath sequence for your particular requirements.

 

"CE"-regulations are met
All data subject to change!

Contact

Schüssler S-5039

Testing and Run-in Device

for SCHÜSSLER Milling Spindles of CNC Machines:

  • S-610
  • S-611
  • S-620
  • S-633
  • S-634
  • S-635
  • S-636
  • S-637
  • S-5010
  • S-5013
  • S-5200
  • S-5201
  • S-5400

 

"CE"-regulations are met
All data subject to change!

Download Info-PDF Contact

Schüssler S-915 - Precision saw

for "V" cutting of rim-locks soldered to eye-rims.

The self-centering clamping fixture adjusts automatically to any rim-lock diameter. The entire fixture can be moved laterally so as to determine the exact position of the "V".

The angle of the "V" is fixed to 120 degrees.

Technical data:

Spindle motors:230/400 V threephase /
50 - 60 Hz, 0,25 kW each
Spindle speed:1300 rpm
Spindle shaft:diameter 16 mm,
for saw blades 63 x 16 mm
Output:approx. 500 cuts/hour
Machine width:600 mm
Machine height:400 mm
Machine depth:600 mm
Net weight:65 kg


"CE"-regulations are met
All data subject to change!

 

 

Download Info-PDF Contact

PadPrinter

PadPrinter

Smallest outlines and letters are collected from a steel cliche and conveyed by a soft silicone rubber head (tampon) to the spectacle frame parts (metal or plastic) and plastic lenses.

Download Info-PDF Contact

Torque control for welding and soldering points

Digital Display with torque sensor
Measurement range: +/- 200 Ncm with integrated overload protection
Accuracy level: +/- 0,2%
Drive: 1/4" HEX Socket

Contact

Frame 4 - Quartz-Heater

For preheating of plastic front parts

Supply:220-230 V
Power:1,05 kW
Machine width:500 mm
Machine height:350 mm
Machine depth:200 mm
Weight:12 kg

"CE"-regulations are met
All data subject to change!

Contact

Frame 2 - High-frequency generator

for preheating of plastic front parts.

A powerful High-Frequency "Tube-type" Generator for the preheating of plastic front parts made of Acetate.
When using corresponding electrode plates it is possible to either heat the complete front or only particular sections (i.e. end-piece dressing).
Electrodes with Teflon inserts permit to heat fronts with already inserted hinges.

Technical data:

Electrical connection:380-415 V
Working pressure:6 bar
Power:2,6 kW
Frequency:41.680 MHz
Machine width:500 mm
Machine height:1400 mm
Machine depth:370 mm
Weight:115 kg

"CE"-regulations are met
All data subject to change!

Contact

Frame 5 - Temple bending machine

for plastic- and metal temples.

  • Simultaneous bending of both temples being already mounted to the front
  • Continuous work cycle thanks to synchronized preheating system
  • Bending tools made of polished aluminum with teflon inserts for curves A-B-C-D-E on plastic and metal temples will be manufactured according to your samples
  • A special attachment for temples not mounted to fronts is also available
  • Available with/without base and with/without heater

Technical data:

Electrical connection:230 V AC - 50 Hz
Compressed air supply:6 bar
Power:0,3 kW
Machine width:500 mm
Machine height (without base):580 mm
Machine depth:760 mm
Weight (without base):80 kg

"CE"-regulations are met
All data subject to change!

Contact

LFA 35 - High-frequency generator

for preheating of plastic front parts.

A powerful High-Frequency "Tube-type" Generator for the preheating of plastic front parts made of Acetate.

Technical data:

Electrical connection:400 V (+/- 10%) - 50/60 Hz
Working pressure:5 bar
Power:3,6 kvA
Frequency:28 to 30 MHz
Machine width:500 mm
Machine height:1220 mm
Machine depth:500 mm
Weight:85 kg

"CE"-regulations are met
All data subject to change!

 

 

Contact

Double Station Front Bending Press

Automatic double Bending Press for Acetate Fronts

  • Touch screen 5,6" commands
  • Intangibke safety barriers
  • Soleniod valve for cooling air flow

Optional:

  • Silicone based changable and regolable equipment on micrimetric movement support
  • Aluminum regolable basement
  • Exchangable silicone set of dies.
  • Special insert for nose bending complete of silicone set.

 

 

Contact

Cooling machine for bent front parts

System for cooling acetate components after bending operation

Easy loading and unloading via front door
Revolving plate inside
Automatic operation (acetate components are rotated by one position every time a new part is loaded)
Temperature control

Contact

Hydrodynamic Separator

This machine has been designed to save time normally required to separate tumbled pieces from abrasive elements of any type, shape and size.

Separation automatically is done within 3 minutes.

  • Abrasives are conveyed to an appropriate container.
  • All tumbled pieces are collected in a special extractable basket.

 

The machine eliminates the time normally spent to manually separate such pieces and can be used for ceramics and objects of any shape.

 

MACHINE DESCRIPTION

The machine is essentially made up of a frame-structure, to which the following elements are associated:

  • A separation chamber positioned between an inlet collector and an outlet collector for treatment liquid.
  • An input hopper communicating with the separation chamber for distribution of the elements to be treated.
  • A pump to convey water to the separation chamber.
  • A filtering bin to hold back abrasive elements suspended in the treatment liquid.
  • A filtering bin to hold back separated elements.

 

Technical Data:

Power supply:230 V 50/60 cycles
Cycle time:3 min.
Machine width:1500 mm
Machine height:1700 mm
Machine depth:600 mm
Weight net:150 kg

"CE"-regulations are met

 

 

 

 

 

Download Info-PDF Contact