Acetate Bonding Machine

This heater with high-frequency generator is a machine,
developed for bonding of plastic and acetate material by
using special glue (no acetone).

Download Info-PDF Contact More

DOSING UNIT (GLUE) FOR HF-BONDING GENERATOR

Pneumatic dispenser for glue complete with micrometric adjustable support and pedal foot switch.

Suitable for all types of fluids

Vacuum suck-back will effectively control glue dripping or stringing.

 

Technical Data:

Dispense time:0,1-20,00 seconds
Voltage:230V 50/60 Hz
Internal Voltage:24VDC
Air input:3 - 7 Bar
Air output:0,1 - 7 Bar
Weight:2,2 kg

"CE"-regulations are met
All data subject to change!

Download Info-PDF Contact

PadPrinter

Smallest outlines and letters are collected from a steel cliche and conveyed by a soft silicone rubber head (tampon) to the spectacle frame parts (metal or plastic) and plastic lenses.

Contact

High-frequency generator

for preheating of plastic front parts.

A powerful High-Frequency "Tube-type" Generator for the preheating of plastic front parts made of Acetate.

Technical data:

Electrical connection:400 V (+/- 10%) - 50/60 Hz
Working pressure:5 bar
Power:3,6 kvA
Frequency:28 to 30 MHz
Machine width:500 mm
Machine height:1220 mm
Machine depth:500 mm
Weight:85 kg

"CE"-regulations are met
All data subject to change!

Contact

Double Station Front Bending Press

Semi-Automatic double Bending Press for Acetate Fronts

  • Touch screen 5,6" commands
  • Intangible safety barriers
  • Soleniod valve for cooling air flow

Optional:

  • Silicone based changable and regolable equipment on micrometric movement support
  • Aluminum regolable basement
  • Exchangable silicone set of dies.
Contact

COOLING MACHINE

These systems are designed to chill acetate components after base curving. As a result, they replace traditional cooling processes, which involve submersion in water.  

There is a selection of 3 models:
Cooling machine with revolving plate
Cooling machine with single belt
Cooling machine with double belt

All models feature workpiece introduction via the front door. Parts are then thermically chilled following an automated process. 

Revolving plate: this model allows for the workpiece (previously chilled on a sensor-controlled revolving plate) to be easily unloaded by hand via the front door.  
Belt systems: instead of a revolving plate, workpieces are carried along one or two (double belt system) belts, resulting in a more even cooling process. 

  • Efficiency
    parts do not need to be dried, saving one step over traditional processes (drying of workpieces after cooling by submersion in water) 
  • Consistent quality
    Controllable, automatic cooling process, thanks to adjustable temperature and sensor-controlled conveyor systems
    Cooling by low-humidity air
Contact

Hydrodynamic Separator

This machine has been designed to save time normally required to separate tumbled pieces from abrasive elements of any type, shape and size.

Separation automatically is done within 3 minutes.

  • Abrasives are conveyed to an appropriate container.
  • All tumbled pieces are collected in a special extractable basket.

The machine eliminates the time normally spent to manually separate such pieces and can be used for ceramics and objects of any shape.

MACHINE DESCRIPTION

The machine is essentially made up of a frame-structure, to which the following elements are associated:

  • A separation chamber positioned between an inlet collector and an outlet collector for treatment liquid.
  • An input hopper communicating with the separation chamber for distribution of the elements to be treated.
  • A pump to convey water to the separation chamber.
  • A filtering bin to hold back abrasive elements suspended in the treatment liquid.
  • A filtering bin to hold back separated elements.

Technical Data:

Power supply:230 V 50/60 cycles
Cycle time:3 min.
Machine width:1500 mm
Machine height:1700 mm
Machine depth:600 mm
Weight net:150 kg

"CE"-regulations are met

Contact